Motorbike Tire Inflator and Sealer
First Aid for punctures while on the go. Seals punctured tires and inflates them again.
For all tire sizes with or without inner tube. Do not use where the tube is ripped or where tire has slipped off the rim or tire has been cut at the side.
Application
1. Remove the cause of the puncture (e.g. nail, screw) if possible, then move until the tire valve is halfway up the height of the rim and let out all of air.2. Shake bottle well. If cold, warm it up.
3. Screw the connector onto the tire valve.
4. Hold container vertically and spray.
Note:
Immediately drive at a max. 30 km/h for 10 – 15 km so that the product can optimally distribute itself on the tire surface. Then correct the tire pressure and immediately go to a workshop to have the tire professionally repaired or replaced. The product is not intended for long-term storage.
Other information
Attention: Tire pressure monitoring systems can be destroyed by the solvents contained in the product. In the event of larger holes (> 3 mm) the sealant can escape and be splashed onto the frame, attached parts or clothing due to the rotation of the tire. The escaping sealant can create a lubricating film on the tire that can result in a risk of slipping.| Brand | LIQUI MOLY |
| Shipping Cost |
|
| Product Location | India |
No reviews found!
No comments found for this product. Be the first to comment!